Photodetectors

Laser Power Calculations:   Using the photodetector's Responsivity at a given wavelength and Ohm's Law; V = IR, the output of EOT's photodetectors can be used to calculate the power of the laser incident on the active area of the detector: For example, if an ET-2030 is producing an output of 20mV, the laser wavelength is 632.8nm and the detector is terminated into 50Ω, the incident power can be derived as follows: I = 0.02V/50Ω, or I = 0.0004A From the responsivity curve contained in the silicon photodetector data sheet, the responsitivity of the ET-2030 @ 632.8nm is 0.4A/W. Therefore, 0.0004A ÷ 0.4A/W = 1mW of incident power Note: This is the amount of power incident on the detector, not necessarily the actual power of the beam as not all of the beam may be incident on the detector.

 
제조사: www.eotech.com
제조국: USA
추가문의사항이 있으시면 연락부탁드립니다.

(주)엘투케이플러스
연락처 : 042-934-7744