ÀÚ·á½Ç

 

ÀÚ·á½Ç

 

 

search

 

 

search

 

 

 

 

 

¤ýHOME > ÀÚ·á½Ç

 

  Heterodyne Module for Vescent Photonics
¤ýÀÛ¼ºÀÚ: ÀüÀçÇÊ ¤ýÀÛ¼ºÀÏ: 2017-06-15 (¸ñ) 12:57 ¤ýÁ¶È¸: 457

D2-250 Heterodyne Module

D2-250-side_new_bug


Features:

  • Now with kinematic adjustments for fast, easy alignment!
  • Conveniently overlap master & slave lasers to produce optical beat note
  • Large range of power input
  • ¡°Pass-through¡± beam input configuration
  • Optical beat note delivered to detection module via fiber
  • Works with multimode fiber for easy alignment or single mode fiber for maximum signal
  • Free-space beat note monitor exit for easy alignment
  • Accessory to D2-135 OPLS
  • Also useful with other heterodyne detection schemes
Frequency offset graph

User-adjustable offsets from 250 MHz to >9.5 GHz



D2-250 schematic
D2-250 Heterodyne Module 
The D2-250 Heterodyne Module is designed to conveniently overlap two lasers to produce an optical beat note.  New kinematic adjustment mounts make it easier and faster than ever to co-align master and slave lasers.  The use of rotatable waveplates at the inputs and polarizing beam splitters allows adjustment of pick off percentage for accepting a large range of powers.




After conversion of the optical beat note to an electrical signal by the D2-160 Beat Note Detector or other fast detector, the electrical signal is delivered to the D2-135 Offset Phase Lock Servo which compares the divided-down beat note with either an internal or user-supplied reference signal and locks the slave laser tightly to maintain the desired offset from the master.  The D2-250 is easy to align and only requires a small percentage of the total laser power from the two lasers.


D2-250 Heterodyne Module Specifications
All specifications subject to change without notice.
1The maximum power incident upon the detector in the D2-160 Beat Note Detector from the sum total of the master and slave lasers must not exceed 1 mW. Damage to the detector can occur at average powers exceeding 1 mW.
2An FC/APC to SC/PC MM fiber is provided with the D2-160 Beat Note Detector.
ParameterValue
In-couplingFree-space
Wavelength range700-1,000 nm
Power range0.1 mW to 200 mW in each laser
Pick-off percentage1-98% (variable)
Throughput>98% in each laser; depending on waveplate orientation
Input polarizationLinear (horizontal or vertical)
Minimum power in beat note1>50 ¥ìW, optimally 200 ¥ìW
Max power at detector1<1 mW
Fiber connector on moduleFC/APC2
Compatible fiber type2Multimode or single mode

Á¦Á¶»ç: www.vescent.com
Á¦Á¶±¹: USA



Ãß°¡¹®ÀÇ»çÇ×ÀÌ ÀÖÀ¸½Ã¸é ¿¬¶ôºÎŹµå¸³´Ï´Ù

(ÁÖ)¿¤ÅõÄÉÀÌÇ÷¯½º   ¿¬¶ôó : 042-934-7744